Features

• Semi-automatic Powder Actuated Tool
• Revolutionary Noise Canceling System
• Power Level Adjuster
• Uses standard .27 cal. 10 shot strip loads
• Patent pending

Applications

• Concrete forming
  • Wood to concrete/steel
  • Electrical fixture to concrete/ steel
  • Fastening wire mesh to concrete
  • Commercial & residential construction

Suitable Base Materials

• Normal-weight concrete
  • Concrete masonry
  • Steel

Technical Data

Weight: 5.47 lbs
Size: 13-3/4″
Pin Type: 300” Head (PD series), .157” & .145” Dia. Shank Drive Pins and Assemblies
Pin Length: 1/2″ to 2-1/2″ total length

Powder Loads

.27cal. (6.8 x 11mm) 10 load strip, semi-automatic load adjuster
Brown |Green | Yellow | Red

Features and Benefits

• Lightweight, superior strength and durable black anodized commercial grade aluminum
  • Available in adjustable sizes 4′ to 18′
  • Works with 12 or 8 gauge wires
  • Perfect for applications that are unfit for scissor lifts such as stairwells or in between T-bars
  • Pairs with standard 1/2″ and 3/8” variable speed drills
  • Proposition 65 Warning for California Residents. Visit: www.P65warnings.ca.gov

Applications

• Eye lag screws
  • Purlin clip
  • Ceiling wires
  • Jack chain

Available Lengths

Features

• Slim tool. Fits in tight spaces.
• Automatic piston return.
• Easy to remove retention collar for cleaning.
• For use in Acoustical, Electrical and Mechanical overhead applications.

• Compatible with Bluepoint Ninja Pole System.
• Uses standard .27 cal. 10 shot strip loads.

Applications

• Concrete forming
  • Wood to concrete/steel
  • Electrical fixture to concrete/ steel
  • Conduit clip to concrete
  • Commercial & residential construction

Suitable Base Materials

• Normal-weight concrete
  • Concrete masonry
  • Steel

Technical Data

Weight: 3.0 lbs
Size: 13-3/4″
Pin Type: 300” Head (PD series), .157” & .145” Dia. Shank Drive Pins and Assemblies
Pin Length: 1/2″ to 1-1/4″ total length

Powder Loads

.27cal. (6.8 x 11mm) 10 load strip
Brown |Green | Yellow | Red

3″ Pin with 28 mm dia. Square Metal Washer

The BP-303A is engineered and designed as a low velocity, semi-automatic .27 caliber tool that can be used to install .300 / 8mm headed drive pins and 1/4″-20 threaded studs, up to 3” pins total length. Power level adjustable and rubber grip on the barrel for comfort when resetting the piston makes this tool a great upgrade from its counterpart tool the BP-301C.  This tool is designed for high speed use and repetitive applications throughout the contractors work hours.

Applications

• Concrete forming
• Wood to concrete/steel
• Electrical fixture to concrete/ steel
• Conduit clip to concrete
• Commercial & residential construction

Suitable Base Materials

• Normal-weight concrete
• Concrete masonry
• Steel

Technical Data

Weight: 5 lbs
Size: 14″
Pin Type: .300″ /.315″ /8mm head pin, 1/4″ – 20 threaded stud
Pin Length: 1/2″ to 3″ total length

Powder Loads

.27cal. (6.8 x 11mm) 10 load strip, semi automatic load adjuster
Green | Yellow | Red | Purple

• ICC-ES ESR-1530 certified pins
• Meets or exceeds wire standards ASTM A641-92
• All wires are tied with the hospital wrap
• Tie requirement to ensure maximum holding power as dictated by building code
• Wire gauge:8 thru 12 gauge
• Length:2′, 4′, 6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′ available
• Custom lengths also available
• Multiple wire termination options(see below)
• Wire can be purchased by:

1. 1. Container for maximum savings
   2. Bundles of 100pcs capped and wrapped securely
   3. Master bundles of 20-100pc bundles
   4. Steel crates that are stackable

Technical Data – 12 Gauge Wire

Bundles/Steel Crate

Small Bundle

Includes 100 pieces

Master Bundle

Includes 20 small bundles